DCS分布式冷却系统在通信基站的应用研究

针对基站柜式空调耗电量大的问题,创造性地使用基站分布式冷却的方式,达到精确送风,节能高效的目的.在应用实践中检验了分布式冷却系统实际节能量和应用效果,总结出分布式冷却系统应用场景和范围,为更大范围推广应用DCS分布式冷却系统提供实践依据.     

液相色谱法测定氯乙酸中乙酸、二氯乙酸的含量

提出了液相色谱法测定氯乙酸中乙酸和二氯乙酸含量的分析方法,计算出氯乙酸的含量,并与现行工业氯乙酸国标分析方法进行了比较,证明液相色谱分析方法简洁、快速,分析结果准确,在氯碱行业具有推广运用的价值。     

某社区文化活动中心全时动态能源管理系统的设计

基于DGJ08-2068—2012《公共建筑用能监测系统工程技术规范》,结合某社区文化活动中心,介绍了全时动态能源管理系统的设计。针对各种能源的采集和统计,制定节能办法,改进能耗管理,逐步降低建筑物能耗,为类似节能改造工程提供参考。     

老井复查评价技术在浅层油藏中的研究与应用

本文以靖安地区浅层老井为例,利用钻井、录井、测井、取心等资料,结合现代测井解释评价技术,对受当时技术条件限制被误判的储层进行再分析研究。制定可行的复查评价标准与流程,确定出油下限,优选补孔潜力井,并结合精细地质研究成果筛选建产目标区,达到挖潜增效和滚动增储的双重目的。对老区日后寻找新储量进行勘探开发具有十分重要的意义。     

Novel hydrophilic N-halamine polymer with enhanced antibacterial activity synthesized by inverse emulsion polymerization

N-halamine-based antibacterial agents have high efficiency and rechargeable antibacterial properties. However, their applications are limited due to their complex synthetic process and fuzzy antibacterial mechanism. In this study, a novel N-halamine antibacterial polymer was synthesized by inverse emulsion polymerization and characterized by Fourier transform infrared, nuclear magnetic resonance, scanning electron microscopy, thermogravimetric analysis, and X-ray photoelectron spectroscopy. Due to the difficulty of purification, most of the subjects studied previously were hydrophobic polymers, while little research on hydrophilic polymers. In this experiment, this difficulty was overcome by controlling the dosage of sodium hypochlorite and methods of dialysis. Because of the complex cell structure of Gram-negative bacteria, it is difficult for N-halamines to release the oxidizing chlorine into the cell. However, the hydrophilic N-halamines can solve this problem, which showed a stronger antibacterial effect on Gram-negative Escherichia coli synthesized in this study. In addition, the particle size and hydrophilic property of the polymer were changed by changing the amount of initiator, and the differences in their antibacterial properties were studied. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47419.     

Giant dielectric phenomenon of Ba0.5Sr0.5TiO3/CaCu3Ti4O12 multilayers due to interfacial polarization for capacitor applications

Ba_0.5Sr_0.5TiO₃/CaCu₃Ti₄O₁₂ (BST/CCTO) multilayers with different stack sequences were deposited on LaNiO₃(LNO)/SiO₂/Si substrates by a sol-gel process. The dielectric properties of BST/CCTO multilayers are significantly affected by the deposition sequence, the layer thickness and the impurities, effects that are interpreted using the Maxwell-Wagner interfacial polarization model. Impurities are generated by elemental interdiffusion at the interfaces of BST/CCTO, and less at the interfaces of BST/LNO and CCTO/LNO. The dielectric permittivity of the CCTO/BST/LNO/SiO₂/Si sample reaches 352,200 at 10 kHz, and stabilizes above 20,000 in the range of 100 kHz to 1 MHz. This work demonstrates an effective approach to enhance dielectric properties for film capacitor applications by constructing multilayers with specific deposition sequences and layer thicknesses.     

基于快中子多重性计数器的Pu样品属性测量研究及改进

快中子多重性计数（fast neutron multiplicity counting, FNMC）分析方法能有效实现对样品属性的测量。本文在研究四阶FNMC分析方程的基础上，利用Geant4模拟搭建了1套3层、每层6个液闪的快中子多重性计数器，并确定了相关参数的数值。模拟设置外部具有1 cm厚的铁、铝、碳和不锈钢包装材料的金属Pu样品，通过方程适应性分析，该放射源基本满足设定的假设。对探测效率和多重计数率等测量参数进行模拟，当Pu样品质量在500 g以内时，由于增加碳作为包装材料，使得样品求解质量偏差增大的幅度小于1.20%，铁材料和不锈钢材料影响较小。根据测量结果，对无外壳条件下的样品进行增殖系数修正，得到三阶多项式拟合方程，拟合优度为0.933，质量在1 kg以内的样品，修正后的求解质量偏差小于6.00%。研究结果表明：1 cm厚的中重金属对Pu样品的测量影响较小，模拟搭建的快中子多重性计数器和系数修正相结合的方式实现了对样品属性的较准确测量。     

苏里格致密砂岩气藏未动用储量评价及开发对策

为落实苏里格气田强非均质致密砂岩气藏储量规模和动用程度、评价稳产潜力，基于储层地质知识库，通过细分计算单元采用"容积法"完成储量复算；结合储层静态参数、气井生产指标及内部收益率建立了储量分类评价标准，将储量分为富集区、致密区和富水区三类；优选"单井控制面积法"评价已动用储量和剩余未动用储量。评价结果表明，苏里格气田储量基础落实，各区块储量动用程度差异大，储量综合动用程度为40.1%，剩余未动用储量规模大，稳产潜力较好。目前经济技术条件下，气田稳产主要通过井网加密、侧钻水平井及查层补孔的方式来提高富集区和致密区储量动用程度，富水区剩余储量的有效动用仍须进一步攻关。     

贝叶斯网络查询语义扩展的专家发现方法

专家发现是实体检索领域的一个研究热点，针对经典专家发现模型存在索引术语独立性假设与检索性能低的缺陷，提出一种基于贝叶斯网络模型的专家发现方法。该方法模型采用四层网络结构，能够实现图形化的概率推理，同时运用词向量技术能够实现查询术语的语义扩展。实验结果显示该模型在多个评价指标上均优于经典专家发现模型，能够有效实现查询术语语义扩展，提高专家检索性能。     

放射性废物焚烧技术的发展历程和展望

焚烧是放射性废物的主要处理技术之一,同常规废物焚烧技术相比,放射性废物焚烧技术更关注对放射性核素的截留效果、系统的辐射安全和对废物的适应能力。随着废物特性的变化、环保要求的日益严格,焚烧技术也在不断的革新和改进,对塑料、橡胶和树脂等高分子聚合物适应性更强的第三代焚烧技术已成为主流,包括热解焚烧、蒸汽重整焚烧以及等离子体焚烧,分别适用于不同的废物类型。未来放射性废物焚烧技术的发展趋势以整体经济性和满足环保要求为前提,尽量提高废物的整体减容效果,对多种废物的兼容处理,并为满足特殊废物的处理要求开发针对性的焚烧技术。